SIMPO - BASIC INFORMATION
Page 18 of 48
Simpo Addressable Panel
Delays T2 menu is for settind delays for Sounder and Fire brigade outputs. The delays
are up to 540 seconds
– 9 minutes. Default delays are 60 seconds.
E N T E R D E L A Y S U s e
t o s e l e c t
S O U N D E R S : 0 0 0
F I R E B R I G A D E : 0 0 0
When the user saves the changes by pressing Enter and then escape the screen will go
one step back and will mark the same zone which is being edited:
Z O N E : 0 1 D I S A B L E D F L O O R 1
Z O N E : 0 2 E N A B L E D F L O O R 2
Z O N E : 0 3 T E S T
F L O O R 3
G O T O
C O U N T
T E S T
D I S A B L E L
2.5.3) Devices Setup:
menu for editing the parameters of the loop devices.
I N S T A L L E R A C C E S S L E V E L
2 ) Z O N E S
3 ) D E V I C E S S E T U P
4 ) A D D R E S S I N G
D : 1 2 9 Z 0 1 L : 1 M C P 1 5 0 E N A B L E D R O O M 1 0 0
D : 2 5 0 Z 0 1
L : 1 M C P 1 5 0 E N A B L E D R O O M 1 0 1
D : 0 0 1 Z 0 2 L : 2 O P T I C A L E N A B L E D R O O M 1 0 2
G O T O
C O U N T
S A V E
D I S A B L E
Concrete device can be chosen from Go To menu. The marked device can be edited by
pressing Enter button. All devices can be saved or removed from this menu.
The states of the devices are ENABLED, DISABLED, NEW, NONE and FAULT.
Button states are:
G O T O
C O U N T
S A V E
D I S A B L E
R E M O V E
E N A B L E
If the device addess is empty (NONE) the following screen will appear:
D : 1 2 9 Z 0 1 L : 1 M C P 1 5 0 E N A B L E D R O O M 1 0 0
