SIMPO - BASIC INFORMATION
Page 11 of 48
Simpo Addressable Panel
2.4) Access Level Menus and Initial Screan
–
the LCD panel is 4 rows, 40 symbols per row.
2.4.1) Starting Screen
–
the system is performing its initial start and is searching for new
devices.
S I M P O
V e r s i o n 1 . 0 0
I N I T I A L I Z I N G
2.4.2) Access Level 1 Screen
– the initial screen after first start, reset or exiting from Access
levels 2 or 3. After saving the devices to the system
„Installation mode” will disappear
and will appear “Active mode”. Only silence buzzer is active.
T U E S D A Y 1 5 - 0 3 - 1 1 1 0 : 2 7
If any other button then the number buttons
or “Silence Buzzer” is pressed the following
message will appear:
* * A c c e s s D e n i e d * *
E n t e r t o I n t r o d u c e C o d e
After valid code the command which was requested will be performed.
2.4.3) Access Level 2 Screen (Maintenance)
– the user has to press any number button for
code introduction.
Press any number button from the front panel:
E n t e r a c c e s s c o d e : * ? ? ? ? ?
Introducing code : 2222
from the front panel’s number buttons and hit “Enter”.
