Teletek electronics LCD64, Operation Manual

Page: 14 / 40

14 LCD64
- Operation Manual
English
memory LoG review from User
To review the memory LOG file the user has to enter a valid code:
To view the code, the time and the date of the event use the following buttons:
Example: There has been an alarm event in the 4 th
zone at 21:08h - this is the first
information displayed on the LCD screen. Press the button to see the day and
month of happening of the event - December, 10 th . Press the
button - the first
two digits are the event code number (check it in the Appendix: Table of events on
page 36), the next two digits (blinking) are showing the zone / user number respec-
tively.
Chime Enabling / Disabling from User
To turn the chime mode on or off the user is required a personal code . Pressing any
numeric key switches alternatively the chime mode on and off. Pressing
con-
firms the selection. By default the chime is disabled.
turning the chime ON and OFF key sequence:
Zone Bypassing by User
To execute bypass operation the user is required a personal code. Pressing a nu
-
meric key bypasses the respective zone. The zone number is surrounded by the “(
-
)”
icon. Pressing the same key once again restores the zone bypass. The “(
-
)” icon is
removed . Pressing
confirms the selection.
Bypassing key sequence
(zone 2 in the example)
:
code
- previous event,
-
following event
code
the chime is
disabled
the chime is
enabled
confirm
code
zone 2 is not
bypassed
zone 2 is
bypassed
confirm