Teletek electronics LCD64, Operation Manual

Page: 15 / 40

LCD64
- Operation Manual 15
English
ATTENTION. To bypass zones 10, 11 and 12 you have to use special button
combinations:
• To bypass Zone 10 use button combination
+ .
• To bypass Zone 11 use button combination
+ .
• To bypass Zone 12 use button combination
+ .
Bypassing zone button sequence
(zone 12 in the example):
manager’s programming menu
General rules for programming parameters in the manager’s menu
Step 1: Enter a valid user code →
4 or 6 digits
Step 2:
Single press the prG
button →
Step 3: Enter an address number →
(3 digits)
Step 4:
Change the parameter value
Step 5: Confirm the change with → button / or reject it with →
button
The blinking LEDs
“
ready
” and “ ”
icon
show that the system is in programming
mode .
Changing User rights for remote access
To change the user rights for remote access, the manager is required to enter his
personal code first.
code
* Default settings.
confirm
code
zone 12 is not
bypassed
zone 12 is bypassed
confirm
The display indicates the respective opera-
tions the user is allowed to execute. The num
-
bers in brackets indicate the permitted opera-
tions . Pressing a numeric button alternatively
switches over the state of the respective re
-
mote access right from disabled to enabled .
The selected programming is confirmed by
pressing the button .
default settings
disabling the Remote
arm parameter
confirm
LCD remote access rights
1
Remote DISARM
(2)
Remote ARM*
3
Remote Code Access
(4)
Remote Programming*
(5)
Remote LOG Review*
6
Remote Bypass
Note: Certain users
may not be permit-
ted to bypass zones
in the system.