Server Installation and Maintenance
Making Connections
22
Lightspeed G-Series Guide
Power and General Cautions and Warnings
Observe the following precautions when connecting power and operating the server.
WARNING: This unit has two power supply connections. Both connections must be
removed to completely de-energize the unit.
WARNING:
Only trained and qualified personnel should be allowed to install, replace, or
service this equipment.
WARNING:
Hazardous voltage or energy is present on the backplane when the system is
operating. To prevent possible injury or death, use caution when servicing.
WARNING:
This product relies on the protective circuit breakers in your building’s
electrical system for short-circuit (overcurrent) protection. The circuit breaker protecting
the Lightspeed Server must not be rated greater than 250 Volts, 20 Amps.
WARNING:
Ensure a proper earth ground connection to the ground conductor in the AC
power plug. Failure to do so could present a severe electric shock hazard that could result
in injury or death.
CAUTION:
Telestream recommends connecting computer equipment to AC power
through an uninterruptible power supply (UPS) with surge protection. Fluctuations in
commercial supply voltage can damage unprotected electronic equipment. A high
quality surge suppressor may be substituted if a UPS is not available, but a surge
suppressor may not provide adequate electrical spike protection.
WARNING:
When installing the product, use the provided or designated connection
power cables. Using any other cables could cause a malfunction or a fire.
WARNING:
The fans might still be turning when you remove the replaceable power
supply from the chassis. Keep fingers, screwdrivers, and other objects away from the
openings in the replaceable power supply’s housing.
WARNING:
Power supplies and other components can get very hot. Use caution when
touching possibly hot components during operation and directly after unplugging.
