![Telescript Telescript's Expert Assembly Instructions Manual Download Page 8](http://html1.mh-extra.com/html/telescript/telescripts-expert/telescripts-expert_assembly-instructions-manual_1082158008.webp)
18. If your system requires additional backweight in order to
get the system to balance on your head properly, attach the
15lb counterweight provided. Take the two hanger bolts and
insert them into the holes at the back edge of the 23” mount-
ing plate. Then, slide the counterweight on to those bolts.
Tighten the 4-point knobs to secure the weight. You may need
to use a flathead screwdriver to hold the bolt in place while
turning the knobs as they may spin as you tighten.
19. Power all accessories using the power supplies
provided. Connect the tally light sensor to the SEN-
SOR port on the side of the TallyOne. You may also
use a custom tally cable that can send the tally sig-
nal out of the camera to the TallyOne (not provided
by Telescript).
Use the tally repeater cable (stereo cable) provided
to loop the sensor signal out of the tally into the
SENSOR port on the side of the ClockOne.
Your ClockOne will display time of day when pow-
ered up. You can display TimeCode or a countup/
countdown by using the LTC port on the side of the
unit. See the Clock and Tally section for further de-
tails on using the clock and tally.
If you require all units to be powered off on ONE
power supply, you will need to contact Telescript
International to obtain a special order power supply
and power adapter.