1. Remove the camera heads wedge plate from the cam-
era head and attach to the bottom of the 23” mount-
ing plate. Depending on the type of camera you are
using, you will need to make sure that you position
this plate in a location that brings the balance of the
system to the center. It may take more than one at-
tempt to get this position correct. Make sure you
mount the wedge plate on the bottom of the mount-
ing plate which has the recessed groove. This groove is
needed to attach your camera specific quick release
plate, or a box camera.
2. Now attach the mounting plate to the tripod head and
secure it in place.
3. Now connect the prompter monitor mounting plate
and the reference monitor mounting plate. To do this,
use the two bolts that should have shipped installed at
the bottom of the prompter monitor mounting plate.
Sit the reference monitor mounting plate over the two
threaded holes on the bottom of the prompter moni-
tor mounting plate and attach using the two bolts.
