15. Along the bottom inside edge of the hood mask, you will find a strip of Velcro just above the bottom flap of
the mask. Attach this strip Velcro on the mask to the Velcro strip along the bottom of the beamsplitter frame. Tuck
the bottom flap of the mask behind the prompter monitor to conceal the mounting hardware.
16. Now start attaching the rest of the mask to the hood by using the Velcro
strips on both the mask and the inside edges of the hood. Be sure to make a
tight bond between the two to ensure no light leaks through the edges.
17. Remove the top two thumb screws on both sides of the
hood. Then, tilt the beamsplitter frame down and slide the
beamsplitter into the frame. Be sure that the reflective side of the
glass is facing outward. The reflective side has a small sticker in
one of the corners. Once you have slid the glass properly into the
frame, tilt the frame back up and reinsert the thumb screws into
the beamsplitter frame to secure the glass in place.
