manualshive.com logo in svg

TELES ISDN Telephone, User Manual, Page: 59 / 63

Share
Download
TELES ISDN Telephone User Manual Download Page 59

Page 48

©1998 by TELES AG Berlin, Version 1.1/fon-eu/15.07.

A telephone reset can help sometimes when problem do not seem to go
away.
Disconnect the telephone line briefly 

or

press the 

-key and the numbers 93.

After a few seconds the display is refreshed.

Date/time wrong or 
not displayed

Power outage

Plug of the telephone cable 
not properly attached.

After first installation or a 
power outage no connection 
has been made.

Regain power or set 
emergency power switch 
to “on”.

Check plug at the wall 
socket and on the tele-
phone.

Date and time are dis-
played after the first 
established telephone 
connection.

Calling party does not 
hear you

Microphone is muted

Turn on microphone

No ringing
No calls

Do not disturb activated.

Wrong MSN is set.

Call forwarding is set.

Room monitoring is set.

Deactivate do not disturb.

Set Multiple Subscriber 
Number.

Turn off call forwarding.

Turn off room monitor-
ing.

Call forwarding can 
not be programmed.

MSN not programmed or 
wrong.

Destination call number not 
programmed.

Switchboard does not sup-
port call forwarding

Set MSN 

Enter destination call 
number. 

Apply for call forwarding 
at the telephone com-
pany.

Problem

Possible causes

Solutions

Summary of Contents for ISDN Telephone
































































Reviews:

No comments