Page 18
©1998 by TELES AG Berlin, Version 1.1/fon-eu/15.07.
Telephoning - Special Functions
Room monitoring permits you to “listen in” into the surroundings of the
telephone from a remote telephone.
Program at least one MSN. If you have several MSNs programmed then
room monitoring functions only with the MSN 3.
Activate the room monitoring function by entering
72, your PIN
and 1 (see page 33).
During any incoming call the TELES.FON does not ring. The caller will
just hear the sounds in the room where the phone is placed.
If the connection lasts longer than 30 seconds the loudspeaker is also
switched on. The caller is informed by a beep signal at his end. He now
has the possibility to speak into the room. This is an extended feature of
room monitoring. Should on the other hand no noise or voices be trans-
mitted from the calling phone to the phone with room monitoring it is
advisable to mute the phone (e.g. press the
-key). When the caller
hangs up finally a short beep can be heard at the phone with room mon-
itoring.
Calling to a phone with room monitoring:
Display on the TELES.FON with room monitoring:
Room monitoring (“babysitting”)
!
Lift the receiver.
Dial the telephone number of the phone for which the room
monitoring function has been set.
During the first 30 sec.
After 30 sec.
Loudspeaker is switched on