Page 12
©1998 by TELES AG Berlin, Version 1.1/fon-eu/15.07.
Basic Telephony Functions
The caller’s list shows in order up to 10 call numbers of the last callers.
In case no connection was established this is indicated by a ’-’ before
the telephone number.
Date and time of the call can also be displayed.
Note: Identical call numbers are stored only once in the caller’s list. This means
that the order of the call numbers in the caller’s list does not necessarily
reflect the order of incoming calls.
You can delete the stored numbers in the redial or caller’s list by pressing
the
-key when the number is displayed.
Dual Tone Multi Frequency (DTMF) signals can be send during an ex-
isting telephone connection by pressing the
-
,
and
keys.
These signals permit you for instance to control answering machines,
voice boxes, special services of switchboards, etc. Read about the nec-
essary control signals, i.e. keys, in the device’s user manuals or listen
for them in the menus of the service number.
Caller’s list with connection display, date and time
Press the
-key.
Press the redial key, if necessary several times. You see the call
number of the caller.
Press the mute key to the display the date and the time.
Press the mute key again in order to return to the call numbers
display.
Control signals (DTMF)