manualshive.com logo in svg

TELES CellX 3G-4, System Manual

Share
Download
TELES CellX 3G-4 System Manual Download Page 31

4

Configuration

Page 31

CELLX box 17.1/002

Example 4.2

 shows a pabx.cfg file for the last mile scenario.  

More information about the pabx.cfg is contained in the 

Chapter 5.2 on page 44

 ff. about

the configuration. 

Example 4.2

pabx.cfg for the last mile scenario 

[System]

PABXName=CELLX_GSM-4_FXS-4 ; (1)

NameServer=8.8.8.8 ; (2)

NtpServer=pool.ntp.org

Timezone=CET-1CEST-2,M3.5.0/02:00:00,M10.5.0/03:00:00 ; Central European Time

ActionLog=/boot/protocol.log weekly 1200 3

TraceLog=/boot/trace.log daily 900 7

MsgLog=/boot/msg.log weekly 1200 3

Failedlog=/boot/failed.log daily 1200 7

Log=/boot/cdr.log daily 1200 7 ; (3)

StatisticTime=/boot/asr.log 00:00 11111111

Controller00=10 FXS ; (4)

Controller01=11 FXS

Controller02=12 FXS

Controller03=13 FXS

Controller04=20 GSM ; (5)

Controller05=21 GSM

Controller06=22 GSM

Controller07=23 GSM

Controller08=40 VOIP ; (6)

Controller09=41 DTMF

Subscriber00=TRANSPARENT ROUTER ANA[0,16,800,250,1500,80,12800,1,1,500,10500,10000,0,1000] NODE[0000] ; (7)

Subscriber01=TRANSPARENT ROUTER ANA[0,16,800,250,1500,80,12800,1,1,500,10500,10000,0,1000] NODE[0001]

Subscriber02=TRANSPARENT ROUTER ANA[0,16,800,250,1500,80,12800,1,1,500,10500,10000,0,1000] NODE[0002]

Subscriber03=TRANSPARENT ROUTER ANA[0,16,800,250,1500,80,12800,1,1,500,10500,10000,0,1000] NODE[0003]

Subscriber04=TRANSPARENT ROUTER GSM[0000,00000,+000000,1,1,1,SIM4,IMSI,BAND(6),TRACE(fecc)] ALARM NODE[0004]

Subscriber05=TRANSPARENT ROUTER GSM[0000,00000,+000000,1,1,1,SIM4,IMSI,BAND(6),TRACE(fecc)] ALARM NODE[0005]

Subscriber06=TRANSPARENT ROUTER GSM[0000,00000,+000000,1,1,1,SIM4,IMSI,BAND(6),TRACE(fecc)] ALARM NODE[0006]

Subscriber07=TRANSPARENT ROUTER GSM[0000,00000,+000000,1,1,1,SIM4,IMSI,BAND(6),TRACE(fecc)] ALARM NODE[0007]

Subscriber08=TRANSPARENT ROUTER ALARM CHMAX[8] NODE[0008]

Subscriber09=TRANSPARENT ROUTER CHMAX[4] DTMF[60] NODE[0009]

#SimCtrlUnitAddress=

;*END CONFIG*

(1)

Definition of the CELLX Box name. This name is displayed in the GATE Manager.

(2)

DNS and NTP settings of the CELLX Box. Adjust these settings to suit your needs. 

(3)

Path to the call detail records (CDR).

(4)

Definition of the FXS controller. The controller numbers (10 … 13) are needed for the routing.

(5)

Definition of the mobile controller. The controller number (20 … 23) are needed for the rout-
ing. 

(6)

Definition of the VoIP controller for all VoIP channel. The controller number (40) is needed for 
the routing. 

(7)

Definition of the settings for FXS controller. 

Summary of Contents for CellX 3G-4

































































Reviews:

No comments

Brands by name

Popular brands

Load more brands