manualshive.com logo in svg

TELES CellX 3G-4, System Manual

Share
Download
TELES CellX 3G-4 System Manual Download Page 2

© Copyright 2014 TELES AG Informationstechnologien. All rights reserved. 

CELLX

®

, TELES

®

, IntraSTAR

®

, Intra*

®

, iGATE

®

, and iSWITCH

®

 are registered trademarks of TELES AG 

Informationstechnologien. All other trademarks used are the property of their respective owners.
The supplied hardware/software systems are protected by copyright and can be used solely by their lawful owners.
All text and figures in this publication have been compiled with great attention to detail. Nonetheless, inaccuracies and 
typographical errors cannot be entirely avoided. TELES AG Informationstechnologien provides this document 'as is' without 
warranty of any kind, expressed or implied. TELES AG Informationstechnologien reserves the right to make changes in 
product design or specifications without notice.

Systems Manual

C E L L X   B o x

CELLX Box 17.1

TELES COMMUNICATIONS CORP.

2400 Skyfarm Drive,

Hillsborough, CA 94010

United States

Phone:  +1 646-225 65 98

E-Mail:  [email protected]

Internet:  http://www.teles.com/cellx/index.html 

Revised: 20 March 2014

002

Software version: 17.1

Summary of Contents for CellX 3G-4

































































Reviews:

No comments

Brands by name

Popular brands

Load more brands