27
Mounting
11 1 2 Mounting with bracket for transmitter
The transmitter of the radio control F6 can be attached to the
wall or to the vehicle using the bracket for transmitter HG1.
Dimensions (W x H x D) 110x112x48 mm
Material: Steel plate
Color: RAL 9005 jet black, smooth, matte
Art. No. 109536084
50 mm
Ø 5 mm
Transmitter bracket installation
Mark the fixing holes using the dimensional sketch.
Drill appropriate holes for the screws used.
Depending on the surface, use for example sheet metal
screws / screws and wall plugs. The max. diameter of the
screws may not exceed 4.5 mm.
Screw the bracket tight.
The transmitter can now be placed in the bracket and taken
out again.
11 2 Receiver F6 E
11 2 1 Mounting location requirements
The receiver must be tightly bolted to the vehicle!
To achieve the broadest range possible, the ideal mounting
location is at the rear of the vehicle.
Avoid mounting in completely closed metal housings to
ensure the unhindered emission of the antenna.
Avoid mounting in direct proximity to other radio systems
or other electronic devices that could cause EMC faults.
Avoid mounting in places directly exposed to atmospheric
conditions.
Select a mounting location so that a vertical installation
(cable gland downwards) and cable infeed from below are
possible.
