16
Function overview
6
Function overview
The radio control F6 was developed specifically for the challen-
ging requirements in the forestry sector. The high-quality radio
electronics in a robust housing make the F6 an ideal controller
for professional skidding and pulling work.
The radio control is suitable for use on forestry vehicles with
permanently attached cable winches and for 3-point cable
winches on agricultural tractors.
6 1 Transmitter
Transmitter F6 S
The transmitter is small, light and easy to handle and you can
carry it conveniently on your waist, midriff or chest (optional).
The ergonomic design of the operating panel allows for fatigue-
free working and safe operation, also if you are wearing gloves.
The electronics are housed in a rubber-reinforced enclosure
made of glass fiber-reinforced polyamide and protected against
the penetration of dust and water jets (protection class IP65).
The antenna is integrated in the housing. The control ele-
ments are surrounded by a protective collar that is capable of
withstanding high mechanical loads. Full batteries or charged
rechargeable batteries (optional) provide sufficient power for
50 hours of continuous transmission in normal operation mode.
