25
Mechanical structure
10 Mechanical structure
10 1 Transmitter F6 S
Belt plate
Stop and emergency switch
Operation buttons
Battery compartment screw cap
Mechanical structure of F6 transmitter
The transmitter of the radio control F6 comprises a plastic
housing (polyamide 66-GF+TPE) with protection type IP65. The
belt plate for passing through the waist belt is located on the
rear of the device. The stop and emergency call switch is located
10 2 Receiver F6 E
Mechanical structure of F6 receiver
Mounting clips
Cable screw thread
Diagnostics LED
The receiver of the radio control F6 comprises a two-part plastic
housing (PC / ABS) with protection type IP65. Three mounting
tabs are provided for monting. A diagnostics LED displays dif-
ferent operating states and faults. The cable entry of the 2.7 m
long connection cable is provided by a cable screw thread.
- as viewed by the operator - on the left side of the device and
the battery / rechargeable battery compartment with screw
cover is on the right side.
Operation is by means of the buttons on the top side.
