Telefunken TTV-149, Owner'S Manual

Page: 6 / 11

4. PRESET menu
Press the PRESET button of remote control or press the MENU button of TV to select the PRESET menu,
you may press P+/P- button to choose each item. The selected item will be indicated by an arrow and will be red in
colour. The rest of the menu will be green. You can change the value of selected item by pressing V+/V- button and
you can use buttons 0-9 and -/--/--- to select a channel. At
“
AUTO-SEARCH
”
, press V+/V- button and the TV will
search all the active channels in your area and store them into memory. Before AUTO-SEARCH, if you select
SYSTEM menu, at the item
“
COLOR-SYS
”
, press V+/V- button to set it to AUTO, so that the colour system will
be automatically selected.
At the item
“
BAND
”
, press V+/V- button to select band (V-L, V-H, U) which you start to adjust.
At the item
“
FINE
”
(fine tuning) or
“
SEMI-SEARCH
”
, it can search higher frequency by pressing V+ button
or lower frequency by pressing V- button . In this process, the striped symbol turns red and the erect block changes
into an arrow referring to the direction of tuning. In SEMI-SEARCH mode when it has found a program, the search
stops. In FINE mode, when you don't press V+/V- button, the search stops. When the search stops, the striped
symbol turns green and the arrow changes into an erect block. The new program will be stored automatically into
the memory.
If you want to delete any program, you can select the POSITION item to set the program number and change
the REMEMBER item to OFF. This program will be deleted.
The PRESET menu displays on the screen is as follows:
PRESET
POSITION 0
REMEMBER ON
BAND V-L
FINE
SEMI-SEARCH
AUTO-SEARCH
5. PICTURE menu
Press the PICTURE button on the remote control or the menu button on the TV to select the PICTURE
menu. Press the PICTURE button continuously or press P+/P- button up/down to choose each item, the chosen item
indicated by an arrow now is red
，
the other items are all green .You can now change the value of the setting. The
display of striped symbol and number below the screen refers to the value of the present item
relevantly. When the input signal is PAL system
，
color system is AUTO or is forced into PAL system and the
picture is coloured
，
the item of TINT will display on the screen
，
All Adjustments made in the PICTURE menu will be stored automatically. If no adjustments are made for
10 seconds menu is automatically exited.