- 6 -
a. Open the AM antenna terminals on the rear of the unit.
b. Attach the AM loop to its base by snapping the tabs on the loop into
the slot in the base.
c. Close each of the terminals to securely after connecting the antenna.
Rotate AM ring shape antenna until the reception is acceptable. (Don't
place the AM ring shape antenna on the units cover, as this will nega-
tively affect the reception)
Connecting Auxiliary Equipment
Connect signal cords between the AUX input terminals on the amplifier and the output terminals of your auxiliary
equipment. You can listen to this source.
Connecting to a digital amplifier
Use optical fibre cable to connect the DVD player's optical fibre output jack with other amplifier's optical fibre, input
jack, for superior digital sound effects .
Connecting the Control Cable
Connect signal line between the power control cable on the players and the amplifiers of the back board.
Connecting the AC Power Cord
Insert the AC power cord into a wall outlet, and your system is at your command!
Caution:
Be sure to unplug the power cord from the outlet when going out or if the system is not in use for an
extended period of time.
DVD plays terminal board
Auxiliary Equipment
DVD plays terminal board
With digital signal input terminals DTS,
Dolby Digital signal decode amplifier
DVD plays terminal board
Amplifiers terminal board