Telefunken TNE 1302, Operating Instructions Manual

Page: 10 / 22

- 9 -
To change the FM reception mode
When you turn into a FM stereo broadcast, STEREO will be displayed on the VFD and you can hear stereo effects.
If FM stereo broadcast is hard to receive or noisy, you can select monaural mode. Reception improves, but you lose
any stereo effect. Press the stereo/mono select button (STEREO) on the unit or stereo/mono select button (ST/MO)
on the remote control so that the STEREO does not appeared on the VFD display.
To restore the stereo effect, press the stereo/mono select button (STEREO) on the unit or stereo/mono select button
(ST/MO) on the remote control so that STEREO will be displayed on the VFD display.
Function Menu Setting List
* You can make some permanent settings changes while the DVD is playing.
* If you want to set this unit’s function, please press the function setting button (SETUP) on the remote control to
display the DVD’s function setting main menu, then use the direction buttons ( , , , ) and confirm button
(ENTER) on the remote control .
Caution: The content of this charter is for reference only.
General Setup Page
TV Display
This menu allows the user to select the aspect ratio of the TV
to be connected.
Angle Mark
Available only when the disc is with angle marks, you can set
the angle mark to show on TV screen or not.
OSD Lang
This menu allows the user to select the language for the on-
screen.
Captions
Set the captions to display or close.
Screen Saver
Set the screen saver to activate or cancel.
Last Memory
Set the last memory state to on or off.
Audio Setup Page
Speaker Setup
l Downmix
When the disc has Dodly Pro Logic stereo, you can choose
LT/RT or Stereo or V.SURR mode to play this disc.
SPDIF Setup
l SPDIF Output
If close Optic or axis output, this system is only used for simu-
lation mode. If set for Mnaual, you can choose output mode
when playing different disc.
HDCD
When playing the HDCD disc, it can set the audio output
width degree.