ENGLISH
10
SET-UP AND USE
Before first use
1.
Place your appliance on a flat and stable surface.
2.
Remove any sticker, protective foil or storage cover on your appliance
3.
Plug your appliance into a earth socket.
4.
Before the firts use, always heat up the appliance to burn the protective fat and to eliminate
smells when you buy new appliances. Follow the below steps:
a.
Turn the thermostat button to maximum, let it heat up for 10 minutes
b.
Air the room during this operation
c.
Let the appliance cool down before starting to clean the appliance with a damp cloth; you
can use a sponge humidified with a dishwashing liquid.
NOTE: It is normal that strange odor comes out from the unit for the first use. This will cease after a short
while.
Using your appliance
Unroll the power cord completely.
Insert the plug with thermostat into the appliance (cf "Assembly" below), make sure the
thermostat is on its minimum position and put the plug in an earthed power socket.
Stand the appliance on a table or flat surface.
Select the cooking temperature using the thermostat knob. The pilot light will come on, indicating
that the appliance is heating.
Preheat the grill to reach the ideal cooking temperature. When the appliance reaches the desired
temperature, the pilot light will go out. Now put the food onto the grilling surface.
The grilling times vary according to the nature of the food and to your personal taste.
When grilling is finished switch off the grill and disconnect it.
NOTE:
Disconnect the power source cable before any operation of cleaning of maintenance and
accessories assembly.
Assembling :
Summary of Contents for PL1
Page 1: ...PLANCHA PL1 ...
Page 14: ...PLANCHA PL1 ...
