User Manual
93
This page displays event log data in the chronological manner. You can read the
event log from the local host or send it to a system log server. Available event
severity levels are as follows: Emergency, Alert, Critical, Error, Warning, Notice,
Informational and Debugging. In this page, you can enable or disable the system
log function.
To log the events, take the following steps.
Step 1
Select
Enable Log
check box.
Step 2
Select the display mode from the
Mode
drop-down list.
Step 3
Enter the
Server IP Address
and
Server UDP Port
if the
Mode
is set
to
Both
or
Remote
.
Step 4
Click
Apply
to apply the settings.
Step 5
Click
View System Log
to view the detail information of system log.
3.4.6 Logout
Choose
Management
>
Logout
. The page shown in the following figure appears.
In this page, you can log out of the configuration page.
Summary of Contents for RTL8676
