14
Keep wireless devices away from electrical devices that generate RF noise
such as microwave ovens, monitors, electric motors, etc.
2.2 Connecting the ADSL Router
The following describes the procedure for connecting the Router with PC.
Step 1
Connect the ADSL interface of the Router through a telephone cable.
Step 2
Connect the Ethernet interface of the Router to the network card
interface (NIC) of a PC through an Ethernet cable.
Step 3
Plug one end of the power adapter to the wall outlet and connect the
other end to the Power interface of the Router.
The following figure displays the connection of the Router, PC, and telephones.
2.3 Factory Reset Button
The Router is reset to the factory default settings by pressing the RESET button for
around 16 seconds while it is powered on. Use a ballpoint or paperclip to gently
push down the RESET button. Remember that this operation may wipe out the
settings stored in the flash memory, including user account information and LAN IP
settings.
The factory configuration of the Router is as follows:
IP address: 192.168.1.1
Subnet mask: 255.255.255.0
User name: 1234
Password: 1234
