9
Item
Description
Enter
Information in
This Column
Ethernet ports on the Router to connect to
other computer or Ethernet devices.
DHCP
Client
status
By default, your Router Residential Gateway is
configured as a DHCP server. This means that
it can assign an IP address, a subnet mask,
and a default gateway address to computers
on your LAN. The default range of IP
addresses that the Router assigns is from
192.168.1.2 to 192.168.1.254. You need to set
your computer (or computers) to Obtain an IP
address automatically (that is, to set
computers as DHCP clients.)
1.9 Safety Precautions
Follow the announcements below to protect the device from risks and damage
caused by fire and electric power.
Use volume labels to mark the type of power.
Use the power adapter that is packed within the device package.
Pay attention to the power load of the outlet or prolonged lines. An
overburden power outlet or damaged lines and plugs may cause electric
shock or fire accident. Check the power cords regularly. If you find any
damage, replace it at once.
Proper space left for heat radiation is necessary to avoid any damage
caused by overheating to the device. The holes are designed for heat
radiation to ensure that the device works normally. Do not cover these heat
radiant holes.
Do not put this device close to a place where a heat source exits or high
temperature occurs. Avoid the device from direct sunshine.
Do not put this device close to a place where is over damp or watery. Do not
spill any fluid on this device.
