TeleEye JN6300-S User Manual Download Page 75

Page: 75 / 110

Alarm Management

DVR User Manual

②

Enable or disable “Snap”, “Alarm-out”, “Preset”, “Buzzer”, “Pop-up Video” and “E-mail”.

The alarm handling setting of intrusion detection alarm is similar to that of the sensor alarm
(see 9.1 Sensor Alarm for details).

③

Click “Apply” to save the settings. You can click “Regional Invasion Config” to go to the

intrusion detection configuration interface.

9.4 Exception Alarm

9.4.1 IPC Offline Settings

①

Click Start

Settings

Alarm

Exception

IPC Offline Settings to go to the interface as

shown below.

②

Enable or disable “Snap”, “Alarm-out”, “Preset”, “Buzzer”, “Pop-up Video”, “Pop-up

Message Box” and “E-mail”. The IPC Offline Settings are similar to that of the sensor alarm
(see 9.1 Sensor Alarm for details).

③

Click “Apply” to save the settings.

9.4.2 Video Loss Settings

①

Click Start

Settings

Alarm

Exception

Video Loss Settings to go to the interface as

shown below.

②

Enable or disable “Snap”, “Alarm-out”, “Preset”, “Buzzer”, “Pop-up Video”, “Pop-up

Message Box” and “E-mail”. The Video Loss Settings are similar to that of the sensor alarm

Summary of Contents for JN6300-S















































































































Search results

Summary of Contents for JN6300-S

Reviews:

Related manuals for JN6300-S

Brands by name

Popular brands

TeleEye JN6300-S, User Manual

Search results

Summary of Contents for JN6300-S

Reviews:

Related manuals for JN6300-S

Brands by name

Popular brands