TeleEye DM597, User Manual

Page: 17 / 26

V1.1 16
5.Tilt Start pos 0.0
6.Tilt End pos 0.0
7.Name display ON/OFF <<Sector name display On/Off Joy stick left or right to select
IRIS CLOSE to Exit
3.Coordinates
ON/OFF <<Coordinates display On/Off Joy stick left or right to select
4.Crosshairs
ON/OFF <<Crosshairs On/Off Joy stick left or right to select
5.Start-UP scr msg
ON/OFF <<Start-up screen message display On/Off
Joy stick left or right to select
IRIS CLOSE to Exit
3.Control options
<<Control options Press OPEN or Joy stick left or right to enter
1.Set pan and Tilt
<<Pan/Tilt setup of dome device Press OPEN or Joy stick left or right to enter
1.Pan Reverse ON/OFF << Pan Reverse ON/OFF Joy stick left or right to select
2.Tilt Reverse ON/OFF << Tilt Reverse ON/OFF Joy stick left or right to select
3. +2 Tilt Limit ON/OFF <<+2 Tilt Limit ON/OFF Joy stick left or right to select
4.Find Home on STA ON/OFF << Find Home on start ON/OFF Joy stick left or right to select
IRIS CLOSE to Exit
2.Set Default Function
<<Set default function Press OPEN or Joy stick left or right to enter
1.Default Function P/V/T <<Select default function (Preshot/Tour/PTZ) Press OPEN or Joy stick left or right to enter
2.Number 1 << Function number selection Press OPEN or Joy stick left or right to enter
3.Delay 001 <<Time delay setting (second) Press OPEN or Joy stick left or right to enter
IRIS CLOSE When Done
IRIS CLOSE When Done
1~128
001
0 1 2 3 4 5 6 7 8 9
IRIS CLOSE When Done
1~999
001
0 1 2 3 4 5 6 7 8 9
IRIS CLOSE When Done
<< Setup tilt start point. Press OPEN or Joy stick left or right to enter
Capture the start point and press CLOSE to exit and return to upper stage
menu.
<< Setup tilt end point. Press OPEN or Joy stick left or right to enter
Capture the end point and press CLOSE to exit and return to upper stage
menu.
<< Joy stick left or right when programming to select preshot and press
OPEN to confirm.
Joy stick left or right to select (0~~9). Press OPEN to confirm
selection.
Press CLOSE to exit or return to upper stage menu when
programming is done.
<< Joy stick left or right when programming to select preshot and press
OPEN to confirm.
Joy stick left or right to select (0~~9). Press OPEN to confirm
selection.
Press CLOSE to exit or return to upper stage menu when
programming is done.