REMOTE CONTROL
97
MEMory | 3
Output trigger is generated when a
memory setting is loaded.
Return Parameter <NR1>
Returns the output source.
:SYSTem:CONFigure:TRIGger:OUTPut
:WIDTh
Set
Query
Description
Sets or queries the output trigger pulse width. A
setting of 0 indicates that the output trigger will go
high or low, depending on the output level setting.
Related
Commands
:SYSTem:CONFigure:TRIGger:OUTPut:LEVel
Syntax
Return Syntax
:SYSTem:CONFigure:TRIGger:OUTPut:WIDTh
{<NR2>|MINimum|MAXimum}
:SYSTem:CONFigure:TRIGger:OUTPut:WIDTh?
[MINimum|MAXimum]
Parameter
<NR2>
0 ~ 60ms.
MINimum
Minimum width = 0
MAXimum
60ms
Return Parameter <NR2>
Returns the trigger output width.
:SYSTem:CONFigure:TRIGger:OUTPut
:LEVel
Set
Query
Description
Sets the polarity of the output trigger level when
the output trigger pulse width is set to 0.
Syntax
Return Syntax
:SYSTem:CONFigure:TRIGger:OUTPut:LEVel
{<NR1>|LOW|HIGH}
:SYSTem:CONFigure:TRIGger:OUTPut:LEVel?
Parameter
0 | LOW
Sets the output trigger to active low.
1 | HIGH
Sets the output trigger to active high.
Return Parameter <NR1>
Returns the trigger output width.
