Teledyne SeaBat T Series, Operator'S Manual, Page: 148 / 152

SEABAT T-SERIES SUBSEA SYSTEM OPTIONS
SeaBat T-Series Subsea Operator's Manual Page 136 January 31, 2019
Version 7
F.3 SeaBat Cables
Additional cables in various lengths are available for purchase.
F.4 Service Level Agreement
A Service Level Agreement (SLA) runs for annual terms of 12 months at a time, and covers a
wide range of services as listed here:

Annual system health check

Backup system (availability depending
on system)

Factory refurbishment (preventive
maintenance procedure)

Product and software defect repair
services

Software and firmware updates

Spare part allowance

Telephone and email support
F.5 Sound Velocity Probe
To ensure proper beam steering, the sonar requires the input of the local sound velocity in the
area of the transmitter and receiver arrays. The sound velocity probe (SVP) is used to
continuously report this value to the processor unit.
The unit described below may be purchased from Teledyne RESON as an option, or a SVP of
similar specifications may be supplied by the customer.
Table 25: SVP Technical Specifications
Specification Value
Type SVP 70
Sound velocity Range: 1350-1800m/s
Resolution: 0.01m/s
Accuracy: ±0.05m/s (0-50m)
Accuracy: ±0.25m/s (0-6000m)
Sampling rate 20Hz and lower, programmable
Depth 6000m
Baud rate 2400-115200
Supply 9-55VDC
Power 2W
Housing Titanium
Dimensions Diameter: 44mm (max)
Length: 165mm (excl. connector)
End cap height: 69mm (max)
Weight 1.0kg (excl. cable)
Temperature -20° to +55°C
For further information, please refer to the appropriate manual.