Teledyne SeaBat T Series, Operator'S Manual, Page: 147 / 152

SEABAT T-SERIES SUBSEA SYSTEM OPTIONS
SeaBat T-Series Subsea Operator's Manual Page 135 January 31, 2019
Version 7
APPENDIX F SEABAT T-SERIES SUBSEA SYSTEM OPTIONS
The following options are available with the SeaBat T-Series Subsea system. If you require more
detailed information about any of these options, please contact Teledyne RESON Sales for assistance.

Extended Warranty Contract

Fiber-Optic Converter

SeaBat Cables

Service Level Agreement

Sound Velocity Probe

System Integration and Training

Teledyne PDS Data Acquisition Software

Wet-end brackets (customized)
F.1 Extended Warranty Contract
All SeaBat T-Series Subsea systems are provided with a standard twelve-month warranty (see
Appendix G Warranty Information ). This option provides the user with the possibility of purchasing
additional annual support.
F.2 Fiber-Optic Converter (for ROV Installations)
For SSP to laptop/PC cable lengths in excess of 25 meters, a fiber-optic link is required. This
bidirectional link can run over a single-mode fiber (where cable lengths in excess of 40km are
possible). The performance of a fiber-optic link is highly dependent on the quality of the link, the
number of connections, and the end-to-end optical loss.
Teledyne RESON offers a converter which resides in a
customer-provided pressure housing and converts the
electrical output from the SSP to an optical signal. At
the surface, a second converter is used to convert the
optical signal back to electrical before routing into the
laptop/PC.
The fiber-optic link must be protocol independent
and have a capacity of 1Gb/s.
Table 24: TC3300 Fiber-Optic Converter Technical Specifications
Specification Value
Ethernet data rates supported 10, 100, 1000 megabits/second
Base-T connector RJ-45
Optical fiber connectors SC
Power requirements Wet end: 48V
Dry end: 48V (supplied by the processor)
Dimensions Height: 353mm
Width: 1814mm
Depth: 1657mm
Figure 83: TC3300 Media Converter
(Single-Mode Fiber Version)