86
Lansis
®
System Manual
Issue 1
EAR99
Technology
Subject
to
Restrictions
Contained
on
the
Cover
Page.
2. Using two small screwdrivers, Allen wrenches, or similar tools, carefully depress the
center piston on each coolant fitting simultaneously. See
Figure C-2: Depressing Coolant Fittings’ Center Pistons
This will allow the coolant to drain out of the Lansis and into the collection bucket.
NOTE:
It is not necessary to drain every drop of coolant out of the
Lansis, but always drain as much as reasonably possible.
3. When the coolant has drained, release the pistons and verify that they return to
their normal, closed position.
4. Use a soft cloth to wipe off any stray coolant from the Lansis and/or surrounding
areas.
5. If available, install rubber fitting covers onto the coolant fittings prior to shipping or
storing the Lansis.
6. Dispose of drained coolant according to local standards/requirements.
44
11
-0
17
4
_
0
130
Carefully depress using two small screwdrivers,
allen wrenches, or similar tool.
