Teledyne Optima, Pocket Manual, Page: 96 / 112

Platinum/Optima CVE Refrigerated Sampler
4-12
4.3.3 Sample Bottle Removal
After the program is complete, the bottles can
be removed and prepared for the laboratory.
1. Gain access to the bottles by releasing the
door latch and swinging the door open.
2. The bottles can then be removed from the
rack by sliding the sequential table forward
until it stops. (Platinum only.)
3. Lift the bottle rack and remove it from the
sampler. *Rotate the discharge tube out of
the way if needed.
*Jog Feature : When the program is in the
D
ONE
or S
TOP
mode the sequential table has a
jog feature that allows the table to rotate 90°.
This feature will allow easy access to the sample
bottles when loading or unloading the bottles.
To activate the jog feature:
1. Push the 0 button and the table will jog 90°.
2. When the bottles have been installed, slide
the table back in the refrigerator. Align the
discharge tube (if adjustable) to the center
of bottle 1 after the indexing table has
located bottle 1.
3. Removed bottles should be capped and
labeled according to the protocol established
by your laboratory.