M41d HBR3 Video Analyzer/Generator - Quick Start Guide
Rev. A1
Page 14
Rev A6 - May 29, 2020
Double click on ATP Manager and follow the installation prompts to
install the ATP Manager on your Windows PC.
2. After installation completes, run the new ATP Manager. It should be
available in the Start Menu under All Programs
→
Quantum Data,
and also from an icon on your host PC Desktop.
Note
: Verify that the version number in the title bar matches the
version on the website.
3. Connect your PC to the M41d using an Ethernet cable. The
connection is made to the Rj45 jack on the back of the M41d labeled
E1 to Network as shown below.
The Ethernet IP connection from the host PC to the M41d can be
accomplished through your corporate network or you can connect
directly. Both scenarios are depicted below.
