M41d HBR3 Video Analyzer/Generator - Quick Start Guide
Rev. A1
Page 23
Rev A6 - May 29, 2020
6.2
Connecting a DisplayPort Sink Device
Under Test
This procedure describes how connect your DisplayPort sink device to
the M41d for testing. This example show the ATP Manager running on a
host PC.
To connect your sink DUT to the M41d:
1. Connect the sink device under test to the M41d DisplayPort Out/Tx
port as shown below (example shows connection to full sized DP
port). Note that you can connect either through the full size standard
DP port or the USB-C DP Alt Mode port.
