Teledyne LeCroy T3PS Series, User Manual

Page: 83 / 159

Selects High Speed Priority or Slew Rate Priority
for CV or CC mode. The voltage or current slew
rate can only be edited if CC/CV Slew Rate
Priority is selected. The ISR indicator will be lit for
CC Slew Rate Priority and the VSR indicator will
be lit for CV Slew Rate Priority.
Note: CC and CV Slew Rate Priority mode are
disabled when voltage/current output is set to
external control.
F-03 0 = CV high speed priority
1 = CC high speed priority
2 = CV slew rate priority
3 = CC slew rate priority
Sets the rising voltage slew rate. Only applicable if
V-I Mode is set to CV Slew Rate Priority.
F-04
0.001-max. V/msec
Sets the falling voltage slew rate. Only applicable if
V-I Mode is set to CV Slew Rate Priority.
F-05
0.001-max. V/msec
Sets the rising current slew rate. Only applicable if
V-I Mode is set to CC Slew Rate Priority.
F-06
0.001-max. A/msec
Sets the falling current slew rate. Only applicable if
V-I Mode is set to CC Slew Rate Priority.
F-07
0.001-max. A/msec
www. .com
information@itm.com 1.800.561.8187