Teledyne LeCroy T3PS Series, User Manual

Page: 152 / 159

EN 61000-4-4:2012 Electrical Fast Transient/Burst, 1 kV on power
supply lines, 0.5 kV on I/O signal data and control lines
4
EN 61000-4-5:2014+A1:2017 Power Line Surge, 1 kV AC Mains, L-N,
L-PE, N-PE
4
EN 61000-4-6:2014 RF Conducted Electromagnetic Field, 3 Vrms,
0.15 MHz - 80 MHz
EN 61000-4-11:2004+A1:2017 Mains Dips and Interruptions, 0%/1
cycle, 70%/25 cycles, 0%/250 cycles
4 5
1 To ensure compliance with all applicable EMC standards, use high-
quality shielded interface cables.
2
Emissions which exceed the levels required by this standard may occur when the
instrument is connected to a test object.
3
This product is intended for use in nonresidential areas only. Use in residential
areas may cause electromagnetic interference.
4
disturbance, product undergoes a temporary degradation or loss of function or
performance which is self-recoverable.
5
cycle voltage interruption test levels per EN61000-4-11.
The instrument complies with the EMC provision of the Radio
Communications Act per the following standards, in accordance
with requirements imposed by Australian Communication and
Media Authority (ACMA):
www. .com
information@itm.com 1.800.561.8187