Teledyne LeCroy T3PS Series, User Manual

Page: 35 / 159

Before connecting the output terminals to a load,
the wire gauge of the cables should be considered.
It is essential that the current capacity of the load
cables is adequate. The rating of the cables must
equal or exceed the maximum current rated
output of the instrument.
20 0.5 9
18 0.75 11
18 1 13
16 1.5 18
14 2.5 24
12 4 34
10 6 45
8 10 64
6 16 88
4 25 120
2 32 145
1 50 190
00 70 240
000 95 290
0000 120 340
The maximum temperature rise can only be 60
degrees above the ambient temperature. The
ambient temperature must be less than 30 degrees.
To minimize noise pickup or radiation, the load
wires and remote sense wires should be twisted-
pairs of the shortest possible length. Shielding of
the sense leads may be necessary in high noise
environments. Where shielding is used, connect
the shield to the chassis via the rear panel ground
www. .com
information@itm.com 1.800.561.8187