2-1
6712 Sampler
Section 2 Operation
2.1 Installation and Operation
Checklist
1. Prepare the sampler.
a. Adjust the distributor arm to fit the
bottle kit. Then install the distributor
arm and discharge tube. For portable
composite sampling, use the composite
tube guide instead of the arm. For
refrigerated single bottle sampling,
remove the distributor arm.
b. Install the bottle kit.
c. Install the power source. If using a power
pack, use only the newer model High
Capacity Power Packs. See details
in the
6712 manual.
d. Check the pump tube. Replace it if
necessary and reset the Pump Tube
Warning. Use only 6712 pump tubing,
identified by the blue alignment collars.
e. Attach the suction line to the pump tube.
f. Attach a strainer to the suction line if
necessary.
2. Install the sampler at the monitoring site.
Summary of Contents for 6712
Page 2: ......
