P a g e
|
17
Use and disclosure shall be in accordance with the proprietary legend and DCS located on page i.
UG2243800-300
Sep 16, 2013
Revised Nov 12, 2013
The bottom line has three sections separated by colons (:) which indicate the
status of hardware inside the WQAR:
Left Section:
Monitors the status of the cellular radios by
displaying whether power is applied to the radios and the
connection status.
R_On:
Radio(s) are powered on. This is the default
state while the aircraft is on the ground.
R_Off:
Radio(s) are powered off.
CON:
Connected. The WQAR has achieved a
connection with the WGCM. “
NO_CON
”
may be
displayed if a connection attempt fails.
DN:
Downloading. The WQAR is currently downloading
data to the base station.
UP:
Uploading. The WQAR is currently uploading data
from the base station.
Middle Section:
Monitors the status of the airborne data
files such as whether the files are ready for transmission.
RDY:
Ready. The WQAR has met the minimum raw
data requirements to transmit data.
RCD:
Recording Completion Delay. The WQAR is
waiting for any final data from the acquisition unit
before performing final compression and closing of the
data file.
CMP:
Compression. The WQAR is actively compressing
data at this time.
<Blank>:
The WQAR is not in any of the above states.
Right Section:
Monitors the status of the RF Interlocks. A
discussion of the RF interlocks is in Section 1. In Figures 4
and 5, the RF Interlocks are shown to be off.