Teledyne Lecroy WaveSurfer 3000, Operator'S Manual, Page: 48 / 97

WaveSurfer 3000 Oscilloscopes
Cursor Settings
Display Cursors
Use either of the following methods to quickly turn on/off cursors:
l
From the menu bar, choose Cursors then select the desired cursor type from the drop-down list.
l
On the front panel, press the Cursor Type button repeatedly to scroll through all the cursor types. Stop when the
desired type is displayed
Position Cursors
With the cursor on, turn the front panel Cursors knob. If there is more than one cursor line, push the Cursor knob until
the correct line is selected, then turn the knob to move it.
OR
Touch and drag the cursor line to a new position.
Standard Cursors Dialog
These controls can be used instead of the front panel controls to set cursors. Access the dialog by choosing Cursors >
Cursors Setup from the menu bar.
Cursor Type buttons select the type of cursor displayed on the grid. Off disables the cursor display.
The Position controls at the right-side of the Standard Cursors dialog display the current cursor location and can be
used to set a new location. The options available depend on the Cursor Type settings.
l
X 1 (negative) and X 2 (positive) time from the zero point.
l
Y 1 (negative) and Y 2 (positive) number of divisions from the zero level. May be a fraction of a division.
l
Track locks cursor lines so they move together, maintaining their same relative distance from each other.
l
Find places the cursor 2.5 divisions (negative or positive) from the tigger point on the first touch. On the second
touch, it returns the cursor to its previous position.
42
923648 Rev A