•
PCI Express Gen4 M.2 M-Key Interposer Carrier
board
•
Connector cable assembly 18 inches for
connection to host slot
•
DC Power Adapter (+12V @ 3 Amps)
•
Extension bracket kit (metal brackets with clip)
supporting M.2 devices of 60, 80 and 110mm
devices (depending on purchased configuration
two more bracket sizes 30 and 42mm included)
•
Thumbscrew, standoff and locknut
•
User Manual and Quick Start Guide (this
document)
2
Interposer Cable Assembly Installatio
If required, install a different extension bracket to the small PCB at the end of the 18" interposer cable. The extension
brackets are provided to allow the user to attach and secure the Teledyne LeCroy M.2 interposer cable on the host system
which usually supports different M.2 card form factors. Follow below instructions to install the extension brackets that will fit
your application. Depending on configuration purchased there are two 18” interposer cable versions, follow the instructions
for the cable at hand.
Cable Assembly for Snap-on Attachment with 30mm PCB Configuration
This option uses a snap-on bracket. The Teledyne LeCroy M.2 Interposer Extension Bracket Kit contains the items listed
here (See figure below).
•
Type - 22110 Extension Bracket
•
Type - 2280 Extension Bracket
•
Type - 2260 Extension Bracket
•
Type - 2242 Extension Bracket
M2 Interposer Extension Bracket Kit
3
Components
The Teledyne LeCroy
Gen4 M.2 MKey Interposer CrossSyncPhy
kit has the following components:
