HDO4000A Getting Started Guide
31
BASICS
Enter
Gates
(in div) to constrain
span of measurement, or just drag
gate markers from edge of grid.
Measurements are waveform parameters that can be expressed as numerical values, such as amplitude or frequency. You can measure up-to-eight
parameters on one or more traces and view the active readout in a table below the grid. Statistics can be added to the readout, along with histicons, a
miniature histogram of the statistical distribution. You can also gate measurements to limit them to a specific portion of the trace or plot the trend of the
measurement over time.
Measure > Measure
Setup
opens the
Measure dialog.
Touch
Measure
column
to re-open Measure
dialog if closed.
Choose
Measurement
and
Source
trace to be measured.
Clear Sweeps
to restart
measurements.
Measurements and Statistics
Add/remove
Satistics
and
Histicons
.
