Teledyne Lecroy CP031, Operator'S Manual

Page: 9 / 28

Operator’s Manual
Introduction
The CP030, CP030A, CP031, and CP031A current probes are designed for easy, highly
accurate current measurements. The compact probes offer wide bandwidth with
over-current protection.
The probes utilize a combination of Hall-effect and transformer technology which
enables measurements to be made on DC, AC and impulse currents.
The CP030 and CP030A have a 50 MHz bandwidth and are designed to measure
continuous currents up to 30 Amp.
The CP031 and CP031A have a 100 MHz bandwidth and are designed to measure
continuous currents up to 30 Amp.
The probes can be used with any Teledyne LeCroy instrument with a ProBus interface,
or by using a ProBus interface adapter. With the ProBus interface, the probe becomes
an integral part of the measuring instrument. The bandwidth limit, Auto Zero and
Degauss functions are all controlled from the instrument’s touch screen user interface.
The interface provides power to the probe, so no external power supply is needed.
Specifications
For the most current specifications, see the probe product pages at
teledynelecroy.com. Specifications are subject to change without notice.
Warranted Characteristics
CP030 CP030A CP031 CP031A
Max Continuous Input
Current at 0.1 V/A
30 Arms 30 Arms
Max Peak Current 50 Apeak non-continuous 50 Apeak non-continuous
Amplitude Accuracy ±1.0 % of reading ±10 mA; to 30 Arms
(DC, 45 to 65 Hz)
±2.0% of reading; to 50 Apeak
±1.0 % of reading ±10 mA; to 30 Arms
(DC, 45 to 65 Hz)
±2.0% of reading; to 50 Apeak
Bandwidth (probe only) DC to 50 MHz DC to 100 MHz
3
www. .com
information@itm.com 1.800.561.8187