Teledex IP250D User’s Guide SIP/MGCP
CONFIGURING THE IP250D
6
3.2 LAN CONFIGURATION
The LAN Configuration page allows configuration of the device’s local network settings.
Sub-pages are available to configure the LAN Interface settings.
3.2.1 LAN Interface Settings
This sub-page allows the user to configure the device’s LAN interface settings. Select
whether you wish for the device to be configured via a DHCP server on the network, or
statically configured. If you wish to statically assign the network settings, enter the IP
address, subnet mask, default gateway IP address and DNS server IP address. It is also
recommended that the network domain name be provided as well, to ensure correct DNS
operation. Press
SAVE LAN SETTINGS
to save the network settings.
3.2.2 VLAN Settings
To enable VLAN for network traffic, set the
VLAN TAG AND PRIORITY TAG
. Press
SAVE
VLAN Settings
to save the VLAN settings. Reset the unit to have the new settings take
effect.
3.3 MGCP CONFIGURATION
If the device is running the MGCP protocol, select
MGCP
from the menu. This will
provide sub-options to configure the MGCP server and device endpoint settings, how the
device is to handle any out-of-band (OOB) DTMF signaling, and VLAN prioritization
for MGCP packets.
FIGURE 3.1 – THE CONFIGURATION HOME PAGE
