Installation Instructions
Original Instructions
Power Terminal Block
Catalog Numbers 2711-TBDC, 2711P-RTBAP, 2711P-RTBDSP, 2711P-RVAC
This document provides instructions on how to remove and install the AC or DC power
terminal block in these PanelView™ terminals.
Summary of Changes
This publication contains new and updated information as indicated in the following table.
Topic
Page
Power Terminal Blocks With A Locking Tab
Power Terminal Blocks With Two Screws
Cat. No.
Power Type
Install Method
Where Used
2711P-RVAC
AC
Locking tab
PanelView Plus 400 and 600
2711P-RTBAP
Two screws
PanelView Plus 7 Performance
2711-TBDC
DC
Locking tab
PanelView 5310
PanelView Plus 400 and 600
PanelView 600 Touch only
PanelView 300 Micro
2711P-RTBDSP
Two screws
PanelView Plus 7 Performance
PanelView 5510
Topic
Page
Added Install Method column, and 2711P-RTBAP and 2711P-RTBDSP rows to affected terminals table.
Separated terminal block replacement instructions by locking tab and two screws methods.
Added publications 2711P-UM008 and 2715P-UM001 to the Additional Resources table.
