manualshive.com logo in svg

Telect 009-8005-1404, Installation Manual

Share
Download
Telect 009-8005-1404 Installation Manual Download Page 2

Dual 200A 4/5 TPA/GMT Fuse Alarm Panel  
with Bay Alarms 

Installation Guide 

 

 

 

 

2 

© Telect, Inc. All rights reserved. 126152-5 5.3.17  
509.926.6000 :: www.telect.com 

 

Model 009-8005-1404 
 
 

Installation Guide, Part Number 126152-5

 

 

 
Copyright 2017, Telect, Inc., All Rights Reserved 
 
Telect and Connecting the Future are registered trademarks of Telect, Inc.  
22425 East Appleway Ave. # 11 
Liberty Lake, WA 99019 
 
  
Telect assumes no liability from the application or use of these products. Neither does Telect convey any 
license under its patent rights nor the patent rights of others. This document and the products described 
herein are subject to change without notice.  
 
 
 

Connecting the future for over 30 years 

 

Telect challenges the status quo and looks beyond what is possible in network connectivity and 
power management. 
 
Founded in 1982, Telect is driven by the principles of innovation and customer service. Headquartered in 
Liberty Lake, WA, the privately held company supports a global network of customers with a 
comprehensive product portfolio and a values-driven corporate culture. 
 
Our products and solutions are found across communications service-provider networks, data centers 
and utility networks around the globe. 
 
At Telect, we pride ourselves on our ability to respond to customer challenges, building a reputation 
among communications service providers for delivering solutions uniquely tailored to their needs. 
 
We simplify networks.™ 
 

• Custom configured solutions 
• Products integrate seamlessly into existing infrastructure 
• Exceptional customer service 
• Hassle-free warranty 

 
 
Technical Support  

Email: [email protected] 
Phone: 509-926-6000 

 
 
 
 

Summary of Contents for 009-8005-1404
















Reviews:

No comments

Brands by name

Popular brands

Load more brands