Page 12
Telect, Inc. • USA +1.509.926.6000 • 52.33.3836.37.52
www.telect.com • © 2010 Telect, Inc., All Rights Reserved, 117200-4 A0
CAUTION
!
CAUTION! Perform this procedure when this equipment is powered! Failure to follow this
procedure may damage equipment or cause equipment service interruptions.
1. Notify the alarm center that you are replacing a fuse.
2. Press the KLM ALARM RESET button.
3. Remove and replace the fuses.
4. Re-install load to equipment.
5. Make sure that the fuses remain closed.
6. Record your activity in the equipment log.
1.9 Service
1.9.1 In-Warranty Service
For assistance with installation, component identification, or missing parts, call Telect: 1-800-
551-4567 or 1-509-926-6000. An application engineer will help you. Telect will repair or replace
defective products.
NOTE:
Call a Customer Service Representative for a Return Material Authorization (RMA) before
returning any equipment.
1.9.2 Out-Of-Warranty Service
The procedure for out-of-warranty service is the same as for in-warranty service, except that
Telect charges a processing fee, and you must submit a purchase order along with a Return
Material Authorization (RMA) before returning equipment. Call a Telect customer service
representative at 1-800-551-4567 for help getting these forms.
1.10 Accessories and Kits
Order on-line at telect.com, or contact your Telect customer service representative at 1-800-551-
4567 to order any of the accessories listed below.
Item
Description
Part Number
Replacement Alarm card
Standard
Telect 400315
Input terminal compression lugs
for #2 AWG wire
for #4 AWG wire
for #6 AWG wire
T & B 256-30695-257
T & B 256-30695-1184
T & B 256-30695-253
Ground terminal compression lugs
for #2 AWG wire
for #4 AWG wire
for #6 AWG wire
Telect 114552
Telect 110516
Telect 101686
