6
OPERATION
6.1
Description of the touch screens
6.1.1
Start screen
When first switching on the console, a Welcome screen is displayed while the
console boots up.
6.1.2
The zone selection screens
The zone selection screens are then displayed.
The GXT 4000 can be set to display its screens in either of two ways.
Display mode 1:
(Standby)
This mode displays:
- the date and time,
- which zones are occupied,
- the host system connection (in this case the RS485 connection has not been
established as shown by the icon
),
- the first 16 programmable soft keys, with any remaining groups of soft keys
(up to 64 according to the version) being accessible using the bottom right
hand slider bar,
- 5 function keys (Cancel
, General Announcement
, Play
message
, Microphone announcement
and Chime
),
- and a
MENU
key to access the console’s configuration menu.
Display mode 1:
(ON)
This mode displays:
- the date and time,
- which zones are occupied (in this case the “North Entrance” zone which has
been set to soft key n° 21),
- the host system connection (in this case the RS485 connection has been
established as shown by the icon
),
- programmable soft key numbers 17 to 32, here showing that zone 21 is
occupied,
- and the function keys (in this example the Microphone announcement key
shows that an announcement is currently being made over the system using
the microphone).
Display mode 2 :
(Standby)
This mode displays:
- the host system connection (in this case the RS485 connection has not been
established as shown by the icon
),
- the date and time,
- which zones are occupied,
- the first 10 programmable soft keys, with any remaining groups of soft keys
(up to 64 according to the version) being accessible using the right hand slider
bar,
- 5 function keys (Cancel
, General Announcement
, Play
message
, Microphone announcement
and Chime
),
- and a
MENU
key to access the console’s configuration menu.
Specialisten in communicatie
www.telecomsystems.nl
Tel. +31 (0)10-2660111
Touch
screen
microphone consoles
GXT 4000
