70
www.behnke-online.de
Instructions myintercom Plus IP video door intercom
Card reader for myintercom Plus
GB
Deleting a transponder
Hold the master card to the card reader and
select the desired memory position (cf. „5.1.
Speicherplatz auswählen“ auf Seite <ÜS>).
The memory position is in use, when the right
decimal point lights up.
Remove the master card from the card reader.
The memory position will light up for approx. 3
consecutive seconds and then start flashing for
approx. 6 seconds. Return the master card to
the card reader, while the display is flashing.
This will delete the memory position, and the
right decimal point will turn off.
5.3. Configuring open door time
The user may set the open door time to intervals
from 0.5 seconds to 9 seconds. By default, this
time is preset to 4 seconds.
Hold the master card to the card reader. The
memory positions will be counted all the way
up to 190 (“
1.9
”). Then, the following will be
displayed:
Subsequently, the door open times will be
displayed in consecutive order.
H0
= 0.5 seconds
H1
= 1 second
...
H9
= 9 seconds
Remove the master card, when the desired time
appears on the display. The display will light
up for approx. 3 consecutive seconds and then
start flashing for approx. 6 seconds.