Telecom Behnke 5 Series, Instructions Manual, Page: 61 / 104

61 www.behnke-online.com
Instructions series 5
GB
Trouble-shooting
Problem Cause Action
The relay activation
code does not acti-
vate the relay
1) Wrong code or no code recorded
2) The telephone used for remote
configuration does not send
DTMF dialling tones.
1) Via configuration steps 10 or 11
you may record two individual re-
lay activation codes. Depending
on the operations mode, these
codes may be used differently,
e.g. enabling or disabling the
relay or turning off completely.
Please refer to the chapter Con-
figuration and Set-up.
2) You need a telephone with DTMF
dialling (= a telephone that can
send DTMF dialling tones) for re-
mote configuration. Certain net-
work telephones require pressing
a button or entering an activation
code to send DTMF dialling
tones. For further information,
please contact your telephone
system administrator.
Voice message,
illumination and
additional amplifier
do not work.
No power supply available. Check the correct installation of the
additional 15 V power supply. Using
voice messages, illumination and
the additional amplifier all require
an additional power supply.