Message Waiting
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
48
UST DK Electronic Telephone
➤
To retrieve a Message Waiting on your [PhDN]
➤
To cancel the Message Waiting on your [PhDN]
➤
To set the Message Waiting LED on another telephone
...or [DN] +
'
to
cancel the light. This
must be done for each
message recorded.
Your MW/FL LED turns OFF without calling the telephone or
VM device.
1. Press the flashing red
MW/FL LED.
Your phone rings the station or voice mail device that left the
message. If the called party or voice mail device answers, the
message waiting indication is cancelled automatically.
If there is no answer, hang up and try at a later time. The red
MW/FL LED on your phone continues to flash.
2. Press
(
after
receiving the message
...or place the handset
on-hook.
If you have more messages, the MW/FL LED continues to
flash (red). To answer the next message. Repeat this procedure.
1. Press
9
.
You hear a steady dial tone.
2. Enter
'
.
The dial tone stops.
3. Press
(
.
The MW/FL LED turns OFF indicating that the message has
been canceled.
1. Press [DN] and dial
an internal number.
You hear ringback or busy tone.
2. Press
9
or
.
The MW/FL flashes red at the called
telephone. The MW/FL LED lights
steady red at your telephone. The
LCD displays the station (
203
) where
you set a message waiting light.
NO. 201
INT 203 MW SET
