Flexible Buttons
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
108
UST DK Electronic Telephone
Microphone Cutoff Button-
Press to turn the microphone off/on while idle, providing privacy when you
receive handsfree internal calls. Also functional when your station receives
calls—the Mic button controls the microphone when you originate calls.
Microphone Button (Fixed)-
Press to turn the microphone off/on while telephone is in use.
&
Modem Button-
Press to reserve a modem from a pool. The LED of the button indicates the
status of the modem pool. See the
UST DK PC/Data Interface User Guide.
#
Additional Message Waiting Buttons-
Phantom Directory Numbers allow multiple Message Waiting buttons with LED
indications for up to four different Directory Numbers [DNs] other than your
Primary Directory Number [PDN]. It performs the same Message Waiting
functions as the MW/FL button.
#
Message Waiting/Flash Button-
The MW/FL LED flashes to indicate that a message is waiting. Press the MW/FL
button to call back the station or voice mail device that activated the LED. This
button performs the following functions: Disconnect and recall dial tone on a CO
line; access Centrex or PBX features; enter a pause or flash signal when
programming speed dial numbers.
Night Transfer Button-
Press to control the system’s CO line ringing pattern for after-hours incoming
calls.
'"(
Tenant Night Transfer Buttons-
Press the appropriate button to control the system’s CO line ringing patterns for
after hours incoming calls for either of the tenants that share a single UST DK
system.
'"(
Night Transfer Lock Buttons-
Initiates entry of the NT Lock password. NT L LED will be on when the system
ring mode (Day/Day2/Night) is locked.
$
Park Button-
Press to park internal or outside calls in an orbit. Call retrieval can be made
locally from the same parking telephone or remotely from a different telephone.
Table 34
Feature Button Definitions
(continued)
Button
Label
Definitions
